Kramer Electronics VP-885 - Manual (Page 16)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-885
12
Figure 5: Wiring an Unbalanced Stereo Audio Output
Figure 6 illustrates how to wire an unbalanced source to the balanced input.
Figure 6: Wiring an Unbalanced Source to a Balanced Input
6.2 Connecting to the VP-885 via RS-232
You can connect to the VP-885 via an RS-232 connection using, for example,
a PC. Note that a null-modem adapter/connection is not required.
Figure 7: Connecting to the VP-885 via RS-232 using a PC
To connect to the VP-885 via RS-232 as illustrated in Figure 7:
• Connect the RS-232 9-pin D-sub rear panel port on the VP-885 unit via a
9-wire straight cable (pin 2 to pin 2, pin 3 to pin 3, pin 5 to pin 5) to the
RS-232 9-pin D-sub port on your PC