Sunlight Supply Quest PowerDry 4000 Pro Dehumidifier - Manual (Page 4)

quest quest
1-866-933-7486
Quest PowerDry 4000 Pro Installation, Operation and Maintenance Instructions
4
www.QuestProtect.com
[email protected]
1. Specifications
Part No. 4031120
Power 10 amps, 115 Vac, Grounded
Water 176 pints/day @ AHAM 80°F, 60% RH
Removal
Blower 380 CFM without external ducting
Refrigerant 2 lbs., 2 oz. R410a
Charge
Operating 33°F to 105°F
Range
Filters: 15.5” x 19.5” x 1.75” Pleated Media MERV-11
Duct Inlet - 12” Flex-Duct
Options: Outlet - 10” Lay-Flat
Warranty Five years;
1st year 100% of Parts and Labor
2nd-5th year 100% of Parts of sealed
refrigeration system.
Dimensions Width 20”, Depth 23”, Height 40”
Weight 135 lbs.
2. Operation
Place dehumidifier inside structure, place condensate hose into a drain, or a very large container, and turn
on. To decrease drying times, make sure all windows and doors are closed to the outside and seal off the wet
area from any unaffected areas.
2.1 Transporting
The Quest PowerDry 4000 Pro must always be upright when transported by vehicle. It may be tipped on to
its handle and back for loading and moving by hand.
2.2 Location
Note the following precautions when locating the Quest PowerDry 4000 Pro:
• It is designed to be used INDOORS ONLY.
• If used in a wet area, plug it into a GROUND FAULT INTERRUPTER.
• DO NOT use the Quest PowerDry 4000 Pro as a bench or table.