WIKA WUR-1 - Manual (Page 14)

GB
WIKA operating instructions attachable indicator, models A-AS-1, WUR-1 14
2437704.05 10/2012 GB/D/F/E
6. Commissioning, operation
6.2 Functions
Overview
■ Selection of the physical pressure unit
■ Positioning the decimal point
■ Setting the smallest display value
■ Setting the largest display value
■ Setting the switch points for output 1
■ Setting the switch functions for output 1
■ Setting the switch points for output 2
■ Setting the switch function for output 2
■ Input of the zero point offset
Key functions
Setting the switching points and switching functions
Change the unit to the left
Change the unit to the right
Input of zero point offset
Configuration
6.3 Configuration
Fitting the LED attachable indicator to the pressure transmitter.
Button 1 Button 2 Button 3
If, during the configuration, no keys are
pressed for 10 seconds, the instrument will
automatically revert to the menu level one
level up. After a further 60 seconds without
any operation of the keys, the instrument
will restart itself. Unsaved changes will
be lost.
+
+