Cirrus Logic CS2200-CP - Manual

Copyright
 Cirrus Logic, Inc. 2010
(All Rights Reserved) http://www.cirrus.com
Fractional-N Frequency Synthesizer
Features
 Delta-Sigma Fractional-N Frequency Synthesis
– Generates a Low Jitter 6 - 75 MHz Clock
from an 8 - 75 MHz Reference Clock
 Highly Accurate PLL Multiplication Factor
– Maximum Error Less Than 1 PPM
 I²C™ / SPI™ Control Port
 Configurable Auxiliary Output
– Buffered Reference Clock
– PLL Lock Indication
– Duplicate PLL Output
 Flexible Sourcing of Reference Clock
– External Oscillator or Clock Source
– Supports Inexpensive Local Crystal
 Minimal Board Space Required
– No External Analog Loop-filter
Components
General Description
The CS2200-CP is an extremely versatile system clock-
ing device that utilizes a programmable phase lock loop.
The CS2200-CP is based on an analog PLL architec-
ture comprised of a Delta-Sigma Fractional-N
Frequency Synthesizer. This architecture allows for fre-
quency synthesis and clock generation from a stable
reference clock.
The CS2200-CP supports both I²C and SPI for full soft-
ware control.
The CS2200-CP is available in a 10-pin MSOP package
in Commercial (-10°C to +70°C) and Automotive (-40°C
to +85°C) grades.
Customer development kits are also available for device
evaluation. Please see
“Ordering Information” on
page 25 for complete details.
I²C / SPI
Auxiliary
Output
6 to 75 MHz
PLL Output
3.3 V
I²C/SPI Software
Control
8 MHz to 75 MHz
Low-Jitter Timing
Reference
Output to Input
Clock Ratio
N
Timing Reference
PLL Output
PLL Lock Indicator
Fractional-N
Divider
Voltage Controlled
Oscillator
Internal
Loop Filter
Phase
Comparator
Delta-Sigma
Modulator
MAY '10
DS759F2
CS2200-CP