Cs42l55, System features, General description – Cirrus Logic CS42L55 User Manual

Page 2

Advertising
background image

2

DS773F1

CS42L55

SYSTEM FEATURES



High Performance 24-bit Converters

Multi-bit Delta Sigma Architecture



Integrated High Efficient Power Management
Reduces Power Consumption

Step-Down Charge Pump Improves
Efficiency

Inverting Charge Pump Accommodates
Low System Voltage by Providing Negative
Rail for HP/Line Amp

LDO Reg. Provides Low Digital Supply
Voltage



Digital Power Reduction

Very Low Oversampling Rate for
Converters

Bursted Serial Clock Providing 24 Bits per
Sample



Power Down Management

ADC, DAC, CODEC, PGA, DSP



Analog & Digital Routing/Mixes

Line/Headphone Out = Analog In (ADC
Bypassed)

Line/Headphone Out = ADC Out

Internal Digital Loopback

Mono Mixes



I²C

®

Control Port



I²S Digital Interface Format



Flexible Clocking Options

Master or Slave Operation

High-Impedance Digital Output Select
(used for easy MUXing between CODEC
and other data sources)

8.000, 11.029, 12.000, 16.000, 22.059,
24.000, 32.000, 44.118 and 48.000 kHz
Sample Rates

APPLICATIONS



HDD & Flash-Based Portable Audio Players



MD Players/Recorders



PDAs



Personal Media Players



Portable Game Consoles



Digital Voice Recorders



Digital Camcorders



Digital Cameras



Smart Phones

GENERAL DESCRIPTION

The CS42L55 is a highly integrated, 24-bit, ultra-low
power stereo CODEC based on multi-bit delta-sigma
modulation. Both the ADC and DAC offer many features
suitable for low power portable system applications.

The analog input path allows independent channel
control of a variety of features. The Programmable Gain
Amplifier (PGA) provides analog gain with zero cross
transitions. The ADC path includes a digital volume at-
tenuator with soft ramp transitions and a programmable
ALC and noise gate monitor the input signals and adjust
the volume appropriately. An analog passthrough also
exists, accommodating a lower noise, lower power ana-
log in to analog out path to the headphone and line
amplifiers, bypassing the ADC and DAC.

The DAC output path includes a fixed-function digital
signal processing engine. Tone control provides bass
and treble adjustment at four selectable corner frequen-
cies. The digital mixer provides independent volume
control for both the ADC output and PCM input signal
paths, as well as a master volume control. Digital vol-
ume controls may be configured to change on soft ramp
transitions while the analog controls can be configured
to occur on every zero crossing. The DAC path also in-
cludes de-emphasis, limiting functions and a beep
generator delivering tones selectable across a range of
two full octaves.

The Class H stereo headphone amplifier combines the
efficiency of an integrated step-down and inverting
charge pump
with the linearity and low EMI of a Class
AB amplifier. A step-down/inverting charge pump oper-
ates in two modes: +/-VCP mode or +/-(VCP/2) mode.
Based on the amplifier’s output signal, internal logic au-
tomatically adjusts the output of the charge pump,
+VHPFILT and –VHPFILT, to optimize efficiency. With
these features, the amplifier delivers a ground-centered
output with a large signal swing even at low voltages
and eliminates the need for external DC-blocking
capacitors.

These features make the CS42L55 the ideal solution for
portable applications that require extremely low power
consumption in a minimal amount of space.

The CS42L55 is available in a 36-pin QFN package for
the Commercial (-40°C to +85°C) grade. The
CDB42L55 Customer Demonstration board is also
available for device evaluation and implementation sug-
gestions. Please see

“Ordering Information” on page 73

for complete details.

Advertising