Cirrus Logic CS5484 - Manual (Page 16)

CS5484
16 DS981F3
ABSOLUTE MAXIMUM RATINGS
Notes: 16. VDDA and GNDA must satisfy [(VDDA) – (GNDA)]  + 4.0V.
17. Applies to all pins, including continuous overvoltage conditions at the analog input pins.
18. Transient current of up to 100mA will not cause SCR latch-up.
19. Applies to all pins, except VREF± .
20. Total power dissipation, including all input currents and output currents.
21. Applies to all pins.
WARNING:
Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
Parameter Symbol Min Typ Max Unit
DC Power Supplies (Note 16) VDDA -0.3 - +4.0 V
Input Current (Notes 17 and 18)
I
IN
- - ±10 mA
Input Current for Power Supplies - - - ±50 -
Output Current (Note 19)
I
OUT
- - 100 mA
Power Dissipation (Note 20) P
D
- - 500 mW
Input Voltage (Note 21) V
IN
- 0.3 - (VDDA) + 0.3 V
Junction-to-Ambient Thermal Impedance 2 Layer Board
4 Layer Board 
JA
-
- 53
43 -
- °C/W
°C/W
Ambient Operating Temperature T
A
- 40 - 85 °C
Storage Temperature T
stg
- 65 - 150 °C