Pds-100, Duo drive precision dispenser, Software version – FMI PDS100 User Manual
Page 3: Duo mode, A = dispense b = dispense
Advertising
Page 3 of 18
Power Up Screens (two individually controlled pumps)
This is what will be seen on power up when the unit is configured for individually controlled
pumps (factory default). For Single pump configured system use “Pump A” screens only.
Figure 4
Pump A & Pump B Location
PDS-100
Duo Drive
Precision Dispenser
Software
Version
Pumps
home
Duo Mode
USE ARROWS TO SELECT
A = Dispense
B = Dispense
PRESS ‘ENTER’ TO ADJUST
Pump B
Pump A
IN-PDS100-13A
11/1/13 HW
Advertising