MSI G41M-P34 - Manual (Page 14)

4
installing memory modules
the memory module has only one notch on the center and will only fit in
the right orientation.
insert the memory module vertically into the dimm slot. then push it in until
the golden finger on the memory module is deeply inserted in the dimm
slot. the plastic clip at each side of the dimm slot will automatically close
when the memory module is properly seated. you can barely see the gold-
en finger if the memory module is properly inserted in the dimm slot.
manually check if the memory module has been locked in place by the
dimm slot clips at the sides.
.
2.
3.
notch
Volt
important
in dual-Channel mode, make sure that you install memory modules of the
same type and density in different channel dimm slots.
to enable successful system boot-up, always insert the memory modules into
the dimm first.
*
*