Norgren Roundline Plus Stainless Steel Body Actuators - Manual (Page 24)

ACT- 157
A
C
TUA
TORS
RT Series Roundline Plus Thrusters
Norgren.com/usa – 303.794.2611 – [email protected]
6 Roller bearing, precision machined black anodized
aluminum body
7 Composite bearings, clear hard anodized aluminum tooling plate
1 Two bearings options:
High load carrying composite bearings...
2 ...or high precision low friction recirculating ball bearings
(roller bearings)
3 Composite bearing:
9/16" to 2.0" bore has stainless steel guide shafts
2-1/2" and 3.0" bore has chrome plated carbon steel
guide shafts
4 Roller bearing: Case hardened steel guide shafts
5 Composite bearings, precision machined clear hard
anodized aluminum body and tooling plate
8 Roller bearings, black oxide steel tooling plate
9 Easily accessible oiler port on roller bearing model
10 RP Series Actuator with stainless steel tube aluminum end
caps and chrome plated stainless steel piston rod.
11
Guide shaft wiper included on roller bearing model
10
4
6
8
2
9
11
1
5
3
7
Roller bearings Composite bearings
Features
»
PS Magnetic piston option for position sensing with either Reed or Hall
Effect switches.
»
Optional ecology seal with non-adjustable cushion for the optimum in
smooth, noise dampening deceleration of load at end of stroke.
»
Shock absorbers optional to decelerate heavier loads or high speed
applications
»
Choice of high load composite or precision low friction bearings.
»
A set of stroke adjusting collars come standard on the extend stroke of
the roller bearing thruster.
This product is for demonstration purposes only.
Force Factor Data
Force Factor (Area)
Bore Code Extend Retract
9/16" 056 0.25 0.2
3/4" 075 0.44 0.36
1-1/16" 106 0.89 0.69
1-1/2" 150 1.77 1.46
2.0" 200 3.14 2.70
2-1/2" 250 4.91 4.47
3.0" 300 7.07 6.47
Force Output Formula
Cylinder Output Force=
Force Factor(area) x Air Line Pressure
Example: 1 1/16" Bore operating at 80psi
Extend Force = .89 x 80 = 71.2lbs
Retract Force = .69 x 80= 55.2 lbs
Replacement Cylinder for
(RT) Roundline Thruster
Bore Model Number
9/16" RP056X***-DAN-TX(0.063) - options*
3/4" RP075X***-DAN-SS-TX(0.125) - options*
1-1/16" RP106X***-DAN-SS-TX(0.250) - options* -NF
1-1/2" RP150X***-DAN-SS-TX(0.250) - options*
2" RP200X***-DAN-SS-TX(0.250) - options*
2-1/2" RP250X***-DAN-SS-TX(0.250) - options*
3" RP300X***-DAN-SS-TX(0.250) - options*
*** = Stroke in inches
* The following options, if in the model number of the thruster, must be
added to the model number of the replacement cylinder part number above.:
PS, M1, CH, CC, CB, NB, NC, NH, PC, UB
Note: If CC, CH or CB, must also add the following option:
CC ------- N(03)
CH ------- N(30) CB ------- N(33)
Replacement Cylinder for
(ERT) Ecology Roundline Thruster
Bore Model Number
9/16" N/A
3/4" ERP075X***-DAN-SS-TX(0.125) - options*
1-1/16" ERP106X***-DAN-SS-TX(0.250) - options* -NF
1-1/2" ERP150X***-DAN-SS-TX(0.250) - options*
2" ERP200X***-DAN-SS-TX(0.250) - options*
2-1/2" ERP250X***-DAN-SS-TX(0.250) - options*
3" ERP300X***-DAN-SS-TX(0.250) - options*