Series da & eda (aluminum) and, Cylinder order information, Act-1-80 – Norgren NFPA Aluminum & Steel Cylinders User Manual
Page 80
ACT-1-80
Brookville, OH USA
Phone 937-833-4033
www.norgren.com
Series DA & EDA NFPA Aluminum Air Cylinders (ø1-1/2 to 8")
Series DJ & EDJ, NFPA Steel Air Cylinders (ø1-1/2 to 12")
● NFPA (MX0) 05 Basic with Double Rod End Cylinder
for 1-1/2" to 6" bore sizes.
● Series DA & EDA Cylinders rated to 250 PSI air,
400 PSI hydraulic (non-shock).
Series EDA Cylinders rated to 250 PSI air only.
● Designed for non-lube service.
● Switches available on all bore sizes.
(See pages ACT-1-90 & 91 for ordering information.)
Double Rod End Cylinder with 05 (MX0) Basic
See page ACT-1-96 for complete instructions on how to order cylinders.
NOTE: Double Rod End cylinders have a (Head Rod End)
and the opposite end cap is considered the (Cap Rod End).
Additional Options – order alphabetically – More on page ACT-1-95.
HR
Case Hardened (45 Rc)
L(_ _) Port Location position 1 standard: L(Head Cap)
(specify position 1 thru 4 for head and/or cap)
MS
Metal Rod Scraper
N(_ _) Cushion Adjust Screw Location position 2 standard: N(Head
Cap) (specify position 1 thru 4 for head and/or cap)
P(_)*
Non-Standard Port Sizes: [specify port size for P(_H) head
only, P(_C) cap only, or P(_) both head & cap]
PS Magnetic
Piston
RS
Rod Stud
Type 1 (5/8" – 1
3
/
4
" øRod)
Type 2 (5/8" & 1" øRod)
RX
Rod Extensions (specify length of additional rod extension)
SC
Single Acting Spring Extend (Cap End)–See page ACT-1-86
SR
Single Acting Spring Retract (Rod End)–See page ACT-1-86
SS
303 Stainless Steel (Hard Chrome Plated)
ST(_C) Stop Tube (Cap End) (specify stop tube length)
ST(_R) Stop Tube (Rod End) (specify stop tube length)
T
Special Rod Threads (specify rod thread)
TX
Thread Extensions (specify length of thread extension)
V Viton
®
Seals
*1
1
/
2
", 2", 2
1
/
2
" bore cylinders have
3
/
8
" NPT Standard,
1
/
2
" NPT oversize.
3
1
/
4
", 4", 5" bore cylinders have
1
/
2
" NPT Standard,
3
/
4
" NPT oversize.
This will add
1
/
8
" to the overall cylinder length.
Mounting Options
01
Side Tapped (MS4)
03
Head Rectangular Flange (MF1)
03
Head Square (ME3) – 7" & 8" Bores
05
Basic Cylinder No Mounting (MX0)
06
Both Ends (4) Tie Rods Ext. (MX1)
6B
Both Ends (2) Tie Rods Ext. (MX4)
6R
Head Tie Rods Ext. (MX3)
7R
Head Trunnion (MT1)
09
Side Lugs (MS2)
10
Center Trunnion (MT4)
11
Side End Angles (MS1)
15
Side End Lugs (MS7)
16
Sleeve Nut Construction (Universal)
20
Head Square Flange (MF5)
60
Base Bar (Not NFPA) - A & EA Only
DA
Series DA Double Rod End Cylinder
EDA
Series EDA Double Rod End Cylinder
DJ
Series DJ Double Rod End Cylinder
EDJ
Series EDJ Double Rod End Cylinder
Cylinder Order Information
05
–
–
–
–
Bore and Stroke (write out )
Piston Rod Diameters
A**
5
/
8
"
Standard on 1
1
/
2
", 2", 2
1
/
2
"
Standard on 3
1
/
4
", 4", 5"
B**
1"
Oversized on 1
1
/
2
", 2", 2
1
/
2
"
Standard on 6", 7", 8"
C**
1
3
/
8
"
Oversized on 3
1
/
4
", 4", 5"
D**
1
3
/
4
" Oversized on 6", 7", 8"
E
2"
Standard on 12"
Oversized on 10"
F
2
1
/
2
Oversized on 10", 12"
1
3
4
2
Piston Rod Threads Type
1
Small Male (Solid)
2
Intermediate Thread Male (Solid)
3
Female
6
Full Thread Male (Solid)
7
Plain Rod End
Port and Cushion Adjustment
Positions
(As viewed from rod end:
Port standard position 1, Cushion
Adjustment standard position 2.)
NOTE: A Port and a Cushion
Adjustment cannot be in the same
position.
** A & EA uses A-D only.
†
Standard with EDA & EDJ
†
Standard with EDA & EDJ
Cushion in Head
3
None
5
†
Non-Adjustable Cushion
7
Adjustable Cushion (Position 2)
9
Decel Cushion
Cushion in Cap
3
None
5
†
Non-Adjustable Cushion
7
Adjustable Cushion (Position 2)
9
Decel Cushion