104 pilot regulator, Ale-8-7, Technical data – Norgren 11-104 Series User Manual
Page 2: Service kits
11-104 Pilot Regulator
ALE-8-7
All Dimensions in Inches (mm)
Littleton, CO USA
Phone 303-794-2611
www.norgren.com
Technical Data
Fluid: Compressed air
Inlet pressure range: 10 psig (0.7 bar) to 400 psig (27.6 bar) maximum*
* For best performance, inlet pressure should be at least 10 psig (0.7 bar) greater than the desired
regulated pressure, but must not exceed the specified maximum.
Operating temperature: 0 to 175°F (-20° to 80°C) **
** Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C).
Maximum bleed rate at 50 psig (3.5 bar) outlet pressure:
0.25 scfm (0.12 dm
3
/s)†
†Maximum bleed rate occurs under dead-end (no flow) conditons.
Pilot ports: 1/4" PTF
Feedback port: 1/8" PTF
Materials
Body, bonnet: Zinc
Valve seat: Brass
Valve ball: Stainless steal
Elastomers: Nitrile
3.18 (81)
6.16 (157)
3.25 (83)
3.13 (80)
0.56
(14)
Service Kits
Type
Part number
11-104
1970-11
Service kit contains diaphragm, valve pin, valve springs, valve seat,
valve ball, and all o-rings.
Panel mounting hole diameter: 1.06" (27 mm)
Maximum panel thickness: 0.38" (10 mm)