Acer Altos G510 series - Manual (Page 59)

49
Configuring the non-Hot Plug HDD
cable cage
This section includes instructions for removing and installing the HDD
cable cage as well as procedures on how to install a hard disk into the
cage.
Note: The HDD cable cage feature is only applicable to the Altos
G510 Basic model.
To remove the HDD cable cage
1 Turn off the system and all the peripherals connected to it.
2 Unplug all cables from the power outlets.
3 Place the system on a flat, stable surface.
4 Remove the front bezel, inner front panel, side panel, and air
baffle.
5 Disconnect the SCSI cable and the SCSI HDD power cable from the
hard disk drive.
6 Loosen the four thumbscrews that secure the cage to the chassis
(1).
7 Slightly pull out the cage from the chassis (2).
BB!H621!.!FO/cppl!!Qbhf!5:!!Xfeoftebz-!Kbovbsz!9-!3114!!21;63!BN