Acer Altos G510 series - Manual (Page 62)

3 Upgrading the system 52
Installing and removing storage
devices
The system supports one 3.5-inch and two 5.25-inch internal storage
devices. The system comes pre-installed with a floppy drive and a CD-
ROM drive. The empty 5.25-inch half-height bay allows you to install
additional drives such as another CD-ROM drive or a tape drive.
To replace the 3.5-inch floppy drive
1 Observe the ESD precautions and pre-installation procedures
described on page 37.
2 Disconnect the IDE and floppy drive cables from the old drive.
3 Press the release bracket on both sides of the drive carrier (1)
before pulling it out from the chassis (2).
BB!H621!.!FO/cppl!!Qbhf!63!!Xfeoftebz-!Kbovbsz!9-!3114!!21;63!BN