Acer Altos G510 series - Manual (Page 99)

89
ECC Event
Logging ECC (Error Correcting Code) tests the accu-
racy of data as it passes in and out of mem-
ory. When this parameter is enabled,
single-bit and multi-bit memory errors will
be recorded in the event log. Enabled
Disabled
PCI Device
Event Logging PCI (Peripheral Component Interconnect) is
a 32-bit bus that supports a 64-bit exten-
sion for new processors, such as Pentium
processors. It can run at clock speeds of 33
or 66 MHz. When this
parameter is enabled, any PCI device error
will be recorded in the event log. Enabled
Disabled
AC Power
Lost/Recovery When this parameter is enabled, any
instance of AC power lost will be moni-
tored and logged in the event log. Disabled
Enabled
Intrusion
Event Logging Allow logging of chassis intrusion events. Enabled
Clear Intru-
sion Status Clear chassis intrusion status on next Boot. Yes
No
Reset Reduc-
tion Memory When this parameter is enabled, only the
the system’s healthy memory size is dis-
played during the POST process. No
Yes
Parameter Description Option
BB!H621!.!FO/cppl!!Qbhf!9:!!Xfeoftebz-!Kbovbsz!9-!3114!!21;63!BN