Acer Altos G510 series - Manual (Page 72)

3 Upgrading the system 62
Installing an expansion card
This section explains how to install an expansion card. The onboard
expansion slots support PCI (Peripheral Component Interconnect)
cards.
Note: The BIOS setup automatically detects and assigns resources
to the new device (applicable only to Plug-and-Play expansion
cards).
To install an expansion card
Note: The illustrations used in this section show the Altos G510
server chassis.
1 Observe the ESD precautions and pre-installation procedures
described on page 37.
2 Locate an empty expansion slot on the mainboard.
3 Loosen the bracket screw on the rear panel.(1).
4 Pull out the card bracket (2).
5 Remove the expansion card from its protective packaging.
BB!H621!.!FO/cppl!!Qbhf!73!!Xfeoftebz-!Kbovbsz!9-!3114!!21;63!BN