Acer Altos G510 series - Manual (Page 8)

To remove the front bezel 40
To remove the inner (front) panel 41
41
To remove the side panel 42
42
Configuring the Hot Plug HDD cage 44
To remove the Hot Plug HDD cage 44
To install a hard disk into the Hot Plug HDD cage
hard disk carrier
45
To install the Hot Plug HDD cage 47
Configuring the non-Hot Plug HDD cable cage 49
To remove the HDD cable cage 49
To install a hard disk into the HDD cable cage 50
To install the SCSI cable cage 51
Installing and removing storage devices 52
To replace the 3.5-inch floppy drive 52
To install a 5.25-inch storage device 54
Upgrading the CPU 56
To remove a CPU with heatsink 56
57
Processor Sequence 58
To install a CPU with heatsink 58
Upgrading the system memory 60
To remove a DIMM 60
To install a DIMM 61
Installing an expansion card 62
To install an expansion card 62
Installing a redundant power supply module 64
To install a redundant power supply module 65
4 BIOS setup 69
BIOS setup 71
Entering BIOS setup 72
Main 74
Advanced 76
Super I/O Configuration 77
IDE Configuration 78
Floppy Configuration 82
PCI/PnP Configuration 83
Boot Settings Configuration 85
Event Log Configuration 87
Onboard Devices Configuration 90
Power 91
BB!H621!.!FO/cppl!!Qbhf!wjjj!!Xfeoftebz-!Kbovbsz!9-!3114!!21;63!BN