Actiontec electronic Actiontec Wireless DSL Gateway GT704WG - Manual (Page 38)

32
Actiontec 54 Mbps Wireless DSL Gateway User Manual
33
Chapter 5 Configuring Advanced Settings
DSL Settings
To access DSL Settings, select DSL Settings from the “Advanced Setup” screen. The
Gateway’s VPI , VCI , Mode, and QoS (Quality of Service) settings can be changed
from this screen. Actiontec recommends not changing these values without first
consulting the
ISP .
DHCP Server
Selecting DHCP Settings in the “Advanced Setup” screen generates the “ DHCP
Settings” screen. The Gateway has a built-in DHCP (Dynamic Host Configuration
Protocol) server that automatically assigns a different IP address to each computer
on the network, eliminating IP address conflicts.
The factory default setting is On. To disable the DHCP Server, select Off, then
click Apply.