Actiontec electronic Actiontec Wireless DSL Gateway GT704WG - Manual (Page 99)

94
Actiontec 54 Mbps Wireless DSL Gateway User Manual
95
Appendix B Switching to Static IP on the Computer
7. The “Local Area Connection Properties” window appears. Click General.
8. In the “Components checked are used by this connection” list box, double-
click Internet Protocol ( TCP/IP ).
9. The “Internet Protocol ( TCP/IP ) Properties” window appears.
10. In the “General” tab, make sure the the circle next to “Use the following IP
Address ” is selected. When active, a black dot appears in the circle. If the circle
already contains a black dot, leave it alone.
11. Enter the following numbers in the “ IP Address” text box:
192.168.1.2
Do not include the periods; they are automatically entered.