Actiontec electronic Actiontec Wireless DSL Gateway GT704WG - Manual (Page 41)

36
Actiontec 54 Mbps Wireless DSL Gateway User Manual
37
Chapter 5 Configuring Advanced Settings
The values in the “Modem IP Address” and “Modem Subnet Mask” text boxes are
the IP and subnet mask address of the Gateway as seen on the network. These
values can be modified for your LAN network, but Actiontec recommends keep-
ing the default factory settings ( IP address 192.168.1.1; subnet mask address
255.255.255.0).
☞
Note: If the Gateway’s LAN IP Address is modified, verify the
DHCP Server range is within the same subnet. For more infor-
mation, see “ DHCP Server Configuration.”
When finished in this screen, click Apply to activate any changes made.
WAN IP Address
Selecting WAN IP Address in the “Advanced Setup” screen causes a warning
screen to appear.
Read the on-screen warning, then click Yes to continue.