Actiontec electronic Actiontec Wireless DSL Gateway GT704WG - Manual (Page 90)

85
Switching to Static IP
on the Computer
To communicate with the Gateway from a computer on the network (to access
the Web Configuration screens, for example), the user may have to switch the
IP
address settings from DHCP -enabled to static IP , so that the computer and the
Gateway are on the same subnet.
To set up static IP on a computer, select the operating system and follow the
instructions.
☞
Note: The following procedures are based on the Gateway’s
factory default IP address. If the Gateway’s IP address has been
changed, enter the new IP address when instructed to enter an
IP address.
Windows 98 SE
1. From the desktop, click Start in the lower left corner.
2. From the menu that appears, select Settings.
B