Actiontec electronic Actiontec Wireless DSL Gateway GT704WG User Manual
Page 45
40
Actiontec 54 Mbps Wireless DSL Gateway User Manual
41
Chapter 5 Configuring Advanced Settings
Source
Identify the source device here, using the device’s
IP
or
MAC
address, then enter
appropriate value in text box. If
IP
is used, enter the netmask address, if applicable.
A priority port range can also be defined, using the “Port Range” text boxes.
Destination
Identify the destination device here, using the device’s
IP
address, then enter appro-
priate value in text box. Enter the netmask address, if applicable. A priority port
range can also be defined, using the “Port Range” text boxes.
Rule List
After finishing the configuration of the QoS settings, click Add to save the settings
in the Rule List menu box. This collection of QoS settings can then be reused at a
future time. If deleting a QoS rule list, highlight it, then click Remove.
When finished in this screen, click Apply to activate any changes made.