Windows 2000 – Actiontec electronic Actiontec Wireless DSL Gateway GT704WG User Manual
Page 96
90
Actiontec 54 Mbps Wireless DSL Gateway User Manual
91
Appendix B Switching to Static IP on the Computer
9. Enter the following numbers in the “Subnet mask” text box:
255.255.255.0
Do not include the periods; they are automatically entered.
10. Click
OK
. The
TCP/IP
Properties window disappears.
11. If there is a check in the box next to “Detect connection to network media,”
click on it to uncheck the box.
12. In the Network window, click
OK
. The Network window disappears.
13. The “System Settings Change” window appears, asking whether the computer
should be restarted. Click Yes.
The computer restarts. It is now set up with a static
IP
address, allowing the user to
access the Gateway’s Web Configuration Utilities (Advanced Setup, Utilities, etc.).
Windows 2000
1. From the desktop, click Start in the lower left corner.
2. From the menu that appears, select Settings.