Lenovo H430 Desktop - Manual (Page 18)

Hardware Maintenance Manual
16
Using the Setup Utility
(Type G41)
5
The Setup Utility program is used to view and change the configuration
settings of your computer, regardless of which operating system you are
using. However, the operating-system settings might override any similar
settings in the Setup Utility program.
Starting the Setup Utility program
To start the Setup Utility program, do the following:
1. If your computer is already on when you start this procedure, shut
down the operating system and turn off the computer.
2. Press and hold the F1 key then turn on the computer. When you hear
multiple beeps, release the F1 key.
Notes:
a. If you are using a USB keyboard (including wireless keyboard) and
the Setup Utility program does not display using this method,
repeatedly press and release the F1 key rather than leaving it pressed
when turning on the computer.
b. If a user password or an supervisor password has been set, the Setup
Utility program menu is not displayed until you type your password.
For more information, see “Using passwords.”
The Setup Utility might start automatically when POST detects that
hardware has been removed or new hardware has been installed in your
computer.
Viewing and changing settings
The Setup Utility program menu lists items that identify system configuration
topics. To view or change settings, see “Starting the Setup Utility program.”
When working with the Setup Utility program menu, you must use the