Lenovo H430 Desktop User Manual
Page 45
Chapter 9. Replacing hardware
43
2. Remove the front bezel by releasing the three plastic tabs inside the
chassis and push the bezel outward as shown.
3. To reinstall the bezel, align the plastic tabs on the bottom of the bezel
with the corresponding holes in the chassis, and then snap it into
position at the bottom and top of the chassis.
4. Refer to the “Completing the installation”.
Replacing a memory module
Attention
Do not remove the computer cover or attempt any repairs before
reading the “Important safety information” in the Safety and Warranty
Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of the
Safety and Warranty Guide or HMM, go to the Support Web site at:
http://consumersupport.lenovo.com