Lenovo THINKSERVER TD230 - Manual (Page 23)

Connector Description
USB connector Used to attach a device that uses a USB connector, such as a USB printer, a USB
keyboard, or a USB mouse. If the USB connectors on your server are not enough
for you to connect all your USB devices, you can purchase a USB hub, which you
can use to connect additional USB devices.
VGA monitor connector Used to attach a VGA monitor or other devices that use a VGA monitor connector.
Hot-swap hard disk drive status LEDs
For server models with hot-swap hard disk drives, each hot-swap hard disk drive also has two status
LEDs on the front.
Figure 5. Hot-swap hard disk drive status LEDs
Table 5. Hot-swap hard disk drive status LEDs
Hot-swap hard disk drive status LED State Description
On The hot-swap hard disk drive is present. 1 Hot-swap hard disk drive present LED
Off The hot-swap hard disk drive is not present.
On The hot-swap hard disk drive is active. 2 Hot-swap hard disk drive activity LED
Off The hot-swap hard disk drive is not active.
LEDs for the Ethernet connectors
The Ethernet 1 and Ethernet 2 connectors have two status LEDs that indicate the LAN connection and
activity of the connection.
Table 6. Ethernet LEDs
LED State Color Description
On Green 10/100/1000 Mb linked
Blinking Green 10/100/1000 Mb activity
RJ-45 Linkage and Activity (left)
Off Off No LAN connection.
Chapter 4 . Locating parts, controls, LEDs, and connectors 13