Lenovo ThinkServer TD200 - Manual (Page 152)

5. Lock the side cover.
6. Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
Installing the side cover
If you removed the side cover, reinstall it.
Attention: For proper cooling and airflow, replace the side cover before turning on
the server. Operating the server for extended periods of time (more than 30
minutes) with the side cover removed might damage server components.
To install the side cover, do the following:
1 Cover release latch
2 Lock
3 Left-side cover
To reinstall the side cover, do the following:
1. Make sure that all cables, adapters, and other components are installed and
seated correctly and that you have not left loose tools or parts inside the server.
Also, make sure that all internal cables are correctly routed.
2. Insert the bottom edges of the cover onto the inside lip of the chassis and rotate
the cover toward the server.
3. Press down on the cover-release latch and close the cover to secure it in place.
4. Lock the side cover.
Note: When you lock the server side cover, it locks both the cover and the
bezel.
Connecting the cables
Attention: To prevent damage to equipment, connect the power cords last.
134 ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide