Lenovo C200 All-In-One - Manual (Page 33)

Chapter 8. Replacing hardware
31
Removing the computer stand
Attention
Turn off the computer and wait 3 to 5 minutes to let the computer
cool before removing the computer stand.
To remove the computer stand:
Note
Place the computer on a flat surface. For this procedure, it helps
to place the computer face-down on a soft flat surface. Lenovo
recommends that you use a blanket, towel, or other soft cloth to
protect the screen surface from scratches or other damage.
1. Remove any media (diskettes, CDs, or memory cards) from the drives,
shut down your operating system, turn off all attached devices, and
the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power
cords, input/output (I/O) cables, and any other cables that are
connected to the computer.
4. Place the computer upside down on the flat surface.
5. Remove the 2 screws that secure the computer stand to the computer.