Lenovo C200 All-In-One - Manual (Page 45)

Chapter 8. Replacing hardware
43
Replacing the LED board
To replace the LED board
1. Remove the computer stand. Refer to “Removing the computer stand”.
2. Remove the computer cover. Refer to “Removing the computer cover”.
3. Remove the 3 screws that secure the LED board to the chassis.
4. Disconnect the cables from the LED board.
5. Lift up the LED board.
6. Connect the cables to the new LED board.
7. Align then screw in the new LED board.
8. Install the computer cover and screw back the computer stand.