Lenovo C200 All-In-One - Manual (Page 51)

Chapter 8. Replacing hardware
49
Replacing the keyboard
Attention
Do not remove the computer cover or attempt any repair before
reading the “Important safety information” in the Safety and Warranty
Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of
the Safety and Warranty Guide or HMM, go to the Support Web site at:
http://consumersupport.lenovo.com.
To replace the keyboard:
1. Remove any media (diskettes, CDs, or memory cards) from the drives,
shut down your operating system, and turn off all attached devices
and the computer.
2. Unplug all power cords from electrical outlets.
Note
Your keyboard might be connected to the standard keyboard
connector
1
at the rear of the computer or to a USB connector
2
either side or rear of the computer.
1 2
3. Disconnect the keyboard cable from the computer and connect the
new keyboard cable to the same connector.