Lenovo ThinkServer RD330 - Manual (Page 129)

6. Press down the small handle on the microprocessor socket and then pull the handle a little bit outward
to release it from the secured position. Then, gently press the microprocessor retainer to open it. Ensure
that the small handle and the microprocessor retainer are in the fully open position.
Figure 62. Opening the handle and microprocessor retainer
7. Touch the static-protective package that contains the new microprocessor to any unpainted surface on
the outside of the server. Then, remove the new microprocessor from the package.
Chapter 6 . Installing, removing, or replacing hardware 117