Lenovo ThinkServer RD330 - Manual (Page 139)

3. Pull the handle and carefully slide the hot-swap hard disk drive or the dummy tray out of the front of
the chassis.
ID
Mem
CPU
PSU
Figure 74. Removing the hot-swap hard disk drive
Figure 75. Removing the dummy hot-swap hard disk drive tray
4. Touch the static-protective package that contains the new hot-swap hard disk drive to any unpainted
surface on the outside of the server. Then, take the new hot-swap hard disk drive out of the package.
Note: Do not touch the circuit board on the hard disk drive.
Chapter 6 . Installing, removing, or replacing hardware 127