Lenovo ThinkServer RD330 - Manual (Page 35)

Notes:
• The Ethernet connector 0 (callout 9 ) marked with “MGMT” is for system management. If you want to use
remote management functions, you need to connect an Ethernet cable to the Ethernet connector 0.
• The Ethernet connector 0 for system management is 82574L by default. If you have selected share mode
for the 82574L Ethernet connector in the Setup Utility program, you can use it as an ordinary Ethernet
connector with 100 Mbps network connectivity. However, teaming with other Ethernet connectors is not
supported if the management Ethernet connector is used as an ordinary Ethernet connector. For detailed
information about setting the mode of the Ethernet connector for system management, see “Setting the
mode of the Ethernet connector 0” on page 53.
Figure 11. Ethernet status LEDs
Ethernet status LED Color Status Description
Amber On The connection speed is 1000 Mbps.
Green On The connection speed is 100 Mbps.
1 Left
None Off The connection speed is 10 Mbps.
Green On The server is connected to a LAN.
None Off The server is disconnected from a LAN.
2 Right
Green Blinking The LAN is connected and active.
6 USB connectors (4)
Used to attach a USB-compatible device, such as a USB keyboard, mouse, scanner, or printer. If you
have more than six USB devices, you can purchase a USB hub, which you can use to connect additional
USB devices.
7 VGA DB-15 connector
Used to attach a VGA-compatible video device, such as a VGA monitor.
10 Serial port
Used to attach a device that uses a 9-pin serial port.
Chapter 3 . Product overview 23