Lenovo C205 All-In-One - Manual (Page 34)

Hardware Maintenance Manual
32
6. Lift up the memory cover .
7. Push out the latches on both sides of the memory socket to release
the memory module and gently pull the memory module upward to
remove it from its socket . Both memory modules can be removed by
following the same procedure.
8. Align the new memory module with the socket, then insert it and push
down on the top edge. Make sure the latches lock the memory module
in place.
9. Align then slide back the memory cover.
10. Screw the memory cover back.
11. Place the protective rubber cap back in position.