Lenovo C205 All-In-One - Manual (Page 39)

Chapter 8. Replacing hardware
37
6. Remove the 4 screws that secure the hard disk drive to the drive bay.
Slide the hard disk drive out of the drive bay.
7. Install the new hard disk drive.
(1.) Insert the new hard disk drive into the drive bay.
(2.) Slide the new hard disk back into position, then secure it to the
disk bay with the 4 screws.
8. Align then slide the hard disk drive bay back into position and secure
it to the chassis with the 4 screws!
9. Put the stand bracket back into place and secure it to the chassis with
its 4 screws.
10. Reattach the computer cover and stand.
Replacing the optical drive
To replace the optical drive
1. Remove the computer stand. Refer to “Removing the computer stand”.
2. Remove the computer cover. Refer to “Removing the computer cover”.
3. Remove the screw that secures the optical drive to the chassis.
4. Disconnect the data and power cables from the optical drive.
5. Slide the optical drive out of the drive bay.