Lenovo C205 All-In-One - Manual (Page 52)

Hardware Maintenance Manual
50
Replacing the LED panel
To replace the LED panel
1. Remove the computer stand. Refer to “Removing the computer stand”.
2. Remove the computer cover. Refer to “Removing the computer cover”.
3. Remove the hard disk drive. Refer to “Replacing the hard disk drive”.
4. Remove the optical drive. Refer to “Replacing the optical drive”.
5. Remove the motherboard cover. Refer to “Removing the motherboard
cover”.
6. Remove the system fan. Refer to “Replacing the system fan”.
7. Remove the heatsink. Refer to “Replacing the heatsink”.
8. Remove the speakers system. Refer to “Replacing the speakers
systems”.
9. Remove the converter board. “Replacing the converter board”.
10. Remove the LED touch panel control module. Refer to “Replacing the
LED touch panel control module”.
11. Remove the function board. Refer to “Replacing the function board”.
12. Remove the LED board. Refer to “Replacing the LED board”.
13. Remove the rear deco. Refer to “Removing the computer rear deco”.
14. Remove the motherboard. Refer to “Replacing the motherboard”.
15. Remove the 8 screws that secure the LED panel and its rear bracket to
the front bezel.
16. Pull the pins out to release the LED panel, then lift it out gently.
17. Remove the 4 screws that secure the LED panel to the panel bracket,
then lift it out the LED panel bracket.
18. Disconnect all cables connected to the LED panel.