Lenovo C205 All-In-One - Manual (Page 54)

Hardware Maintenance Manual
52
Replacing the camera
To replace the camera
1. Remove the computer stand. Refer to “Removing the computer stand”.
2. Remove the computer cover. Refer to “Removing the computer cover”.
3. Remove the rear deco. Refer to “Removing the computer rear deco”.
4. Remove the 2 screws that secure the camera to the panel front bezel.
5. Remove the data cable from the camera.
6. Pull out the camera gently from the panel front bezel.
7. Connect the camera cable to the new camera.
8. Align and then screw in the new camera.
9. Reattach the computer rear deco and secure it to the chassis with the
screws.
10. Reattach the computer cover and stand.