Lenovo ThinkServer RD230 User Manual
Page 45
Advertising
![background image](/manuals/471158/45/background.png)
2. Remove the screws that secure the plastic filler and then remove the plastic filler.
Figure 19. Removing the filler
3. Touch the static-protective package that contains the new hard disk drive to any unpainted metal
surface on the server. Then, remove the hard disk drive from the package and place it on a
static-protective surface.
4. Make sure that the drive tray handle is in the open position.
Chapter 5
.
Installing, removing, or replacing hardware
33
Advertising