Lenovo ThinkServer RD230 User Manual
Page 66
Advertising
6. Connect the mini SAS signal cable to ports 0-3 on the RAID controller.
Note: Use the 400 mm (15.75 inches) mini SAS signal cable.
Figure 40. Connecting the mini SAS signal cable to the RAID controller
1
Ports 0-3
2
Ports 4-7 (reserved for use)
7. Install the RAID controller into an appropriate PCI card slot on the riser card assembly. Then, install
the screw to secure the RAID controller in place.
Figure 41. Installing the RAID controller into the PCI card slot on the riser card assembly
8. Install the riser card assembly with the RAID controller into an appropriate PCI card slot on the system
board.
54
ThinkServer User Guide
Advertising