Konica Minolta bizhub PRESS C70hc - Manual (Page 153)

IC-601 12-15
12.3 Parameter details 12
12.3.4 [Finishing] tab
Function
Name Option Description
[Staple] [Off],
[Left Corner],
[Right Corner],
[2 Position (Left)],
[2 Position (Right)],
[2 Position (Top)] Select this check box to specify stapling.
From the drop-down list, specify the
number of staples and the stapling posi-
tion.
When [Binding Position] is in [Top Bind], [2
Position (Top)] can be specified.
[Center Staple
& Fold] Off, On Center Staple & Fold can be specified.
[Punch] [Off]
[2-Hole (Left)], [2-Hole (Right)], [2-Hole
(Top)]
[3-Hole (Left)], [3-Hole (Right)], [3-Hole
(Top)]
[4-Hole (Left)], [4-Hole (Right)], [4-Hole
(Top)]
[Multi Punch (Left)], [Multi Punch (Right)],
[Multi Punch (Top)] Select this check box to specify hole
punching.
From the drop-down list, specify the
number of punches and the punching po-
sition.
When [Binding Position] is in [Top Bind],
[2-Hole (Top)], [3-Hole (Top)], [4-Hole
(Top)] can be specified.
[Fold] [Off]
[Z-Fold]
[Half Fold In], [Half Fold Out]
[Letter Fold In], [Letter Fold Out], [Zigzag
Fold In], [Zigzag Fold Out]
[Double Parallel Fold In], [Double Parallel
Fold Out]
[Gate Fold In], [Gate Fold Out]
[Multi-Letter Fold In], [Multi-Letter Fold
Out]
[Multi-Half Fold In], [Multi-Half Fold Out] Set the fold function.
From the drop-down list, specify the fold-
ing condition.
[Trim] Off, On [Trim] can be specified when [Center Sta-
ple & Fold]or [Multi-Half Fold] is selected.
[Divide Output] Off, On Set this to output a job with it divided.
[Pages per Section] Select a unit when dividing a job.