Konica Minolta bizhub PRESS C70hc - Manual (Page 49)

IC-601 5-11
5.1 Windows Vista/Server 2008/7 5
- In Windows Vista/Server 2008, you can continue the task and specify the printer driver installation disk
to install the printer driver if it is not installed in advance. When the [Found New Hardware] window ap-
pears, follow the displayed messages to perform the procedure. For details, refer to Steps 11 through
20 in the succeeding section.
- In Windows 7/Server 2008 R2, you cannot specify the installation disk after the machine is connected
to the computer. Install the printer driver in advance (Step 1).
Installing the printer driver by specifying the IP address using the Add Printer
Wizard
In Windows Vista/Server 2008, you can add a Web service device using the addition function of the printer
after connecting this machine.
Reference
- In Windows 7, a window for specifying an installation disk does not appear after the machine is con-
nected to the computer. Install the printer driver in advance and connect the driver as described in
"Making the printer driver known from the Network window".
0 Installing the driver to Windows Vista/Server 2008-based computers requires the administrator author-
ity.
1
Turn on the power of the machine while it is connected to the network.
Since the printer is searched for during the installation, be sure to connect the machine to the network.
2
To use the Web service print, check that [Network discovery] is enabled in [Network and Sharing Cent-
er] on the computer.
3
Insert the Driver CD-ROM into the CD-ROM drive.
4
Click [Start], and then select [Control Panel].
% In Windows Vista/Server 2008, click [Printers] under [Control Panel] - [Hardware and Sound]. When
[Control Panel] is displayed in Classic View, double-click [Printers].
5
Click [Printers] under [Hardware and Sound].
% When [Control Panel] is displayed in Classic View, double-click [Printers].
6
Click [Add a printer] on the toolbar.
% In Windows Vista:
% In Windows Server 2008: