Konica Minolta bizhub PRESS C70hc - Manual (Page 176)

IC-601 13-11
13.3 Printing a document on the machine for which user authentication is specified 13
Setting a user authentication (XPS driver)
1
Display [Basic] tab, and click [Authentication/Account Track].
2
Select [Recipient User] in [User Authentication].
Note
To enter User Authentication, you need to enable the Device Option in the [Configure] tab manually. For
details, refer to page 12-3.
3
Enter [User Name] and [Password] that are registered with the machine.
% The user name and password must be specified with 1 to 64 characters.
Reference
You can complete the setting without specifying Password.
4
Click [OK].
5
Click [OK] to start printing.
If the entered user name is a name enabled on the machine, the job is printed and counted as a job for
the specified user.