Konica Minolta bizhub PRESS C70hc - Manual (Page 122)

IC-601 10-21
10.3 Parameter details 10
10.3.13 [Print Position] tab
Function Name Option Description
[Image Shift] [Off], [Shift Front/Back
Evenly], [Shift
Front/Back Separately] Set [Right] and [Bottom] to shift a position of a print im-
age.
Set [Right] to shift the output image horizontally. (Posi-
tive value: shift to the right, negative value: shift to the
left)
Set [Bottom] to shift the output image perpendicularly.
(Positive value: shift to the bottom, negative value: shift
to the top)
[Print Position
Setting] [Left], [Center], [Right] Set a print position if the output size is larger than the
original size.
[Crop Mark] [Off], [Corner], [Center],
[Corner/Center] Set this to print a crop on paper.
[Setting for Impo-
sition] [Per Page], [Per Sheet] Specify whether to print a crop for imposition per page
or per sheet.
[Only on Front
Side] Off, On The crop mark is printed only on the front surface if [2-
Sided] is selected.
[Corner Crop
Mark Type] [Type 1], [Type 2], [Type
3] Specify a type of a corner crop.
[Type 1]:
[Type 2]:
[Type 3]:
[Trim Margin] 0 to 20.0 mm A position can be shifted while displaying a preview.
[Horizontal Shift] -20.0 to 20.0 mm A position can be shifted while displaying a preview.
[Vertical Shift] -20.0 to 20.0 mm A position can be shifted while displaying a preview.