5 manual installation using the add printer wizard, 1 windows vista/server 2008/7, 1 for network connection (lpr/port 9100/smb) – Konica Minolta bizhub PRESS C70hc User Manual

Page 40: Settings of this machine, Manual installation using the add printer wizard, Windows vista/server 2008/7 -2, For network connection (lpr/port 9100/smb) -2, 5manual installation using the add printer wizard

Advertising
background image

IC-601

5-2

5.1

Windows Vista/Server 2008/7

5

5

Manual Installation Using the Add Printer Wizard

This chapter describes the procedure for installing the Windows printer driver using the standard Windows
Add Printer function, without using the installer.

5.1

Windows Vista/Server 2008/7

5.1.1

For network connection (LPR/Port 9100/SMB)

In Windows Vista/Server 2008/7, you can install the printer driver either by searching for the printer on the
network, or by creating a new printer port.

Settings of this machine

Before using Port9100, LPR, or SMB printing, you must configure the network settings for the machine.

d

Reference

For details on the network settings of this machine, refer to "User's Guide POD Administrator's Reference"
or "User's Guide Main Body".

To use SMB printing in the IPv6 environment, [Direct Hosting Setting] for the machine must be enabled. For
details, refer to "User's Guide POD Administrator's Reference" or "User's Guide Main Body".

Installing the printer driver by searching for the printer using the Add Printer
Wizard.

0

Installing the driver to Windows Vista/Server 2008/7-based computers requires the administrator au-
thority.

0

Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.

1

Insert the Driver CD-ROM into the CD-ROM drive.

2

Click [Start] and then [Devices and Printers].

% In Windows Vista/Server 2008, click [Printers] under [Control Panel] - [Hardware and Sound]. When

[Control Panel] is displayed in Classic View, double-click [Printers].

Items to be configured

Description

IP Address

In [TCP/IP Settings] of this machine, specify the IP address.

RAW port number

To use Port9100 printing:

In [TCP/IP Settings] for the machine, enable the RAW port number
(initial setting: [9100]).

LPD Setting

To use LPR printing:

In [LPD Setting] for the machine, enable LPD printing.

SMB Setting

To use SMB printing:

At [Print Settings] in [SMB Settings] for the machine, specify NetBI-
OS Name, Print Service Name, and Workgroup.

Advertising