Konica Minolta bizhub PRESS C70hc - Manual (Page 57)

IC-601 5-19
5.2 Windows XP/Server 2003 5
5.2.2 For network connection (SMB)
To use SMB printing, specify the port by specifying the printer while installing the printer driver. The printer
can be specified either by searching for the printer on the network, or by entering the printer name directly.
Settings of this machine
To use SMB printing, you must configure the network settings for the machine in advance.
d
Reference
For details on the network settings of this machine, refer to "User's Guide POD Administrator's Reference"
or "User's Guide Main Body".
To use SMB printing in the IPv6 environment, [Direct Hosting Setting] for the machine must be enabled. For
details, refer to "User's Guide POD Administrator's Reference" or "User's Guide Main Body".
Installing the printer driver by specifying the printer using the Add Printer
Wizard
0 Installing the driver to Windows XP/Server 2003-based computers requires the administrator authority.
1
Insert the Driver CD-ROM into the CD-ROM drive.
2
Click [Start], and then select [Printers and Faxes].
% If [Printers and Faxes]is not displayed in the [Start] menu, open [Control Panel] from the [Start] menu,
click [Printers and Other Hardware], then click [Printers and Faxes].
3
In Windows XP, select [Add a printer] from the [Printer Tasks] menu.
In Windows Server 2003, double-click [Add Printer].
In Windows XP:
In Windows Server 2003:
[Add Printer Wizard] appears.
Items to be configured Description
IP Address In [TCP/IP Settings] of this machine, specify the IP address.
SMB Setting To use SMB printing:
At [Print Settings] in [SMB Settings] for the machine, specify NetBI-
OS Name, Print Service Name, and Workgroup.