Konica Minolta bizhub PRESS C70hc - Manual (Page 73)

IC-601 6-6
6.1 Mac OS X 10.4/10.5/10.6 6
7
Click [Add].
When the selected printer is registered in the [Print & Fax], the setting procedure is completed.
Reference
- For OS X 10.4, you can also add a printer by clicking [Add] in the [Printer Setup Utility] window.
Configuring the LPR settings
[TCP/IP Settings] for the machine
Specify the IP address for the machine.
[LPD Setting] for the printer
Before using LPR printing, enable LPD printing in [LPD Setting] for the machine.
d
Reference
For details on the IP address settings of this machine, refer to "User's Guide POD Administrator's Reference"
or "User's Guide Main Body".
For details on the [LPD Settings] of this machine, refer to "User's Guide POD Administrator's Reference" or
"User's Guide Main Body".
Configuring [ TCP/IP Setting] for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1
In the [Apple Menu], select [System Preferences...].
2
Click the [Network] icon.
3
The Ethernet setting window appears.
% For OS X 10.5/10.6, select [Ethernet], and then click [Advanced...].
% For OS X 10.4, select [Built-in Ethernet], and then click [Configure...].
4
Click the [TCP/IP] tab.
5
Configure the settings including the IP address and subnet mask according to the settings of the net-
work to which the Macintosh computer is connected.
6
Click the close button at the top left corner of the window.
% When the [This service has unsaved changes] message appears, click [Apply].