Konica Minolta bizhub 751 - Manual (Page 16)

Using an application 4
Setup Utility for RightFax 4-2
4.1 Reading an application
An application can be read into the Setup Utility for RightFax using either of
the following methods.
- Reading an application from a file
- Connecting to a multifunctional peripheral and reading the application
2
Note
For details on saving an application file, refer to “Saving an application as
a file” on page 4-30.
To read an application from a file
This procedure describes how to open an application file (*.xml) from the
computer and read the application information into the Setup Utility for
RightFax.
Before performing the operation, check for the following.
0 The application file is saved on the computer.
1
From the Windows Start menu, start the Setup Utility for RightFax.
– Click the Windows Start button, point to “All Programs”, then
“KONICA MINOLTA”,“Setup Utility for RightFax 1.0”, and then click
“Setup Utility for RightFax”.
The initial window appears.
2
Below Device List , select a multifunctional peripheral.