Konica Minolta bizhub PRESS C7000P - Manual (Page 67)

IC-601 6-29
6.3 Job Operation in the Image Controller (Image Controller Hold) 6
[Finishing] screen
Function Description
[Staple] You can specify the staple setting.
[Fold & Staple] You can specify the fold & staple setting.
[Punch] You can specify the punch setting.
[Fold] You can specify the fold setting.
[Trim] You can specify the trim setting.
[Divide Output] You can specify the number of pages to staple.
[Offset Output Copies] You can specify the number of copies to offset. The output job is off-
set at the specified number of copies.
[Offset Output Pages] You can specify the number of sheets to offset. The output job is off-
set at the specified number of sheets.
[Output Tray] You can specify the output tray.
[Output Order] - [Face Up] Check this to output the page with face up.
[Output Order] - [N to 1] Check this to print in reverse order.
[Sort/Group] You can specify the sort printing or group printing.
[Pile Permission] You can specify whether to accept to stack the print job in the stack-
er.
[Needless Tab Ejection] Check this to eject an unwanted tab paper.
Preview image Displays the preview image of the settings of [Layout and Finishing],
[Finish-Fold], and [Sort/Group].