Konica Minolta bizhub PRESS C7000P - Manual (Page 70)

IC-601 6-32
6.3 Job Operation in the Image Controller (Image Controller Hold) 6
[Crop Mark] screen
Function Description
[Print Crop Mark] You can specify whether to print the crop mark or not.
[Crop Mark] You can specify the type of the crop mark (Type 1/2/3).
[Cut Length] You can specify the cut length.
[Print Position Setting] You can specify the position to print the crop mark (Corner, Center,
or Corner/Center).
[Offset] You can specify the horizontal shift/vertical shift.
[Only on Front Side] Check this to print the crop mark only on the front side in 2-sided
printing.
[Setting for Imposition] You can specify whether to print the crop mark per page or per
sheet.
Preview image Displays the preview image of the settings of crop mark and impo-
sition.