Konica Minolta bizhub PRESS C7000P - Manual (Page 69)

IC-601 6-31
6.3 Job Operation in the Image Controller (Image Controller Hold) 6
[Per Page Setting] screen
Function Description
[Per Page Setting] It displays the per page settings for the job.
[Up]/[Down]: You can change the order of the selected per page set-
ting.
[Add]: You can add a new per page setting. You can set the added
per page setting in the [Add/Edit] section.
[Delete]: You can delete the selected per page setting.
[Tab Paper Settings]: You can set the paper tray for Tab Paper 1/2,
Size, and Number of Tabs.
[Hole-Punch Settings]: You can set the hole-punch settings when
you want to enable/disable the punch setting per page. This setting
is linked with the punch setting in the [Finishing] screen.
[Add/Edit] (To add a new per page setting)
1. Press [Add].
2. Set [Page Number] in the [Add/Edit] section.
You can specify more than one page with hyphen and comma.
(E.g.: 2,4,6-10)
3. Set each items.
You can set [Print Type], [Paper Tray], [Paper Name], [Index Pa-
per], [Size], [Feed Direction], [Glossy], [Staple], [Finish Stapling],
and [Punch].
4. Press [OK].
(To edit an existing per page setting)
1. Select the per page setting to edit.
2. Set each item in the [Add/Edit] section.
3. Press [OK].