Konica Minolta bizhub PRESS C7000P - Manual (Page 84)

IC-601 6-46
6.4 Job Operation in the Main Body (Main Body Hold/HDD) 6
6.4.1 Print, Store into the HDD of the Main Body, and Delete Job in the Hold Queue
of the Main Body
This section describes how to print, store into the HDD of the main body, and delete a job in the hold queue.
The following functions are used to print, store into the HDD of the main body, and delete a job in the hold
queue.
Reprint Job
This section describes how to print (reprint) the job in the hold queue of the main body using [Output] function.
1
Click [Main Body Hold/HDD] tab of the Job Centro Screen.
[Main Body Hold/HDD] screen appears.
% When the user authentication/account track is set to the main body and you click [Main Body
Hold/HDD] tab, [User Auth/Account Track] screen appears. In this case, [Main Body Hold/HDD]
screen appears after authentication. For the authentication operations, refer to page 5-3.
2
Select the job to print from [Hold Job] list.
The selected job is highlighted.
% You can not print when you select multiple jobs.
3
Click [Output].
[Output] screen appears.
% You can also operate by using [Output] from the right click menu.
% You can also operate by using [Job Operations] menu - [Output].
4
From [Output Method], select [Print].
5
Specify the number of copies to print in [Sets].
% The available number of copies is from "1" to "9999".
6
To delete the printed job from the hold queue of the main body, check [With Job Delete].
7
Click [OK].
The job is transmitted to the print queue of the main body and printed.
Function Description
[Output] function This function prints (reprints) the job in the hold queue of the main body or
stores the job into HDD of the main body.
[Secure Print]/[Pass-
word Off] function This function unlocks the secure print job in the hold queue of the main body
or makes to return to the state before unlocked.
[Delete] function This function deletes the job from the hold queue of the main body.